|
|||||
|
|
| 超声激励下弧齿锥齿轮研齿系统动态研磨力分析 | |
| 引用本文： | 邓效忠,杨建军,魏冰阳,方宗德. 超声激励下弧齿锥齿轮研齿系统动态研磨力分析[J]. 中国机械工程, 2007, 18(19): 0-2312 |
| 作者姓名： | 邓效忠 杨建军 魏冰阳 方宗德 |
| 作者单位： | 1. 西北工业大学,西安,710072;河南科技大学,洛阳,471003 2. 西北工业大学,西安,710072 3. 河南科技大学,洛阳,471003 |
| 摘 要： | 在综合考虑超声激励和齿面几何传动误差激励的情况下，建立了有间隙的两自由度周向振动的弧齿锥齿轮研齿动力学模型，得到了齿面间动态研磨力的计算公式。通过算例分析表明，与普通研齿效果对比，超声激励增大了齿面间的动态研磨力，使齿面在啮合过程中出现了碰撞，当超声激励振幅值为16．5N·m时，超声研齿系统由周期运动进入到混沌状态。 |
| 关 键 词： | 弧齿锥齿轮 超声激励 传动误差 间隙 动态研磨力 |
| 文章编号： | 1004-132X（2007）19-2359-03 |
| 修稿时间： | 2007-01-29 |
Dynamic Lapping Force Analysis of Spiral Bevel Gear Lapping System with Ultrasonic Excitation |
|
| Deng Xiaozhong,Yang Jianjun,Wei Bingyang,Fang Zongde. Dynamic Lapping Force Analysis of Spiral Bevel Gear Lapping System with Ultrasonic Excitation[J]. China Mechanical Engineering, 2007, 18(19): 0-2312 | |
| Authors: | Deng Xiaozhong Yang Jianjun Wei Bingyang Fang Zongde |
| Abstract: | The rotational two-degree freedom dynamics model of gear-lapping system of a spiral bevel gear with single backlash was established by considering ultrasonic excitation and transmission error excitation. The formula of dynamic lapping force was established . By means of numerical simulation method, it is showed that ultrasonic excitation increases the dynamic lapping force between gear pairs. In the process of gear meshing,the phenomenon of tooth surface impact is appeared. When the ultrasonic excitation amplitude equals to 16.5Nm, gear-lapping system changes from periodic motion into chaotic state. |
| Keywords: | spiral bevel gear ultrasonic excitation transmission error backlash dynamic lapping force |
| 本文献已被 维普 万方数据 等数据库收录！ | |
| 点击此处可从《中国机械工程》浏览原始摘要信息 | |
| 点击此处可从《中国机械工程》下载免费的PDF全文 | |