| 一种组合式延迟抽芯机构的设计 |
| |
| 引用本文： | 张文玉.一种组合式延迟抽芯机构的设计[J].模具制造,2007,7(7):32-34. |
| |
| 作者姓名： | 张文玉 |
| |
| 作者单位： | 湖南工学院,湖南衡阳,421002 |
| |
| 摘 要： | 针对塑件的局部加强筋的中心在空间与出模方向成夹角,且该处两侧壁上还有两个方孔.介绍一种注射模组合式延迟抽芯机构的设计及其工作过程,并对设计中的一些关键问题进行了分析讨论.
|
| 关 键 词： | 注射模 抽芯机构 模具设计 |
Design of Combined Core-Pulling Mechanism with Delayed Action |
| |
| Zhang Wenyu.Design of Combined Core-Pulling Mechanism with Delayed Action[J].Die & Mould Manufacture,2007,7(7):32-34. |
| |
| Authors: | Zhang Wenyu |
| |
| Abstract: | The center of a partial ribs of the part has a centain angle with the direction of demoulding in the space, and there were two square edged orifices on two sidewalls,design of combined core-pulling mechanism with delayed action of the injection mold and its working process were introduced, the key points of the design were discussed. |
| |
| Keywords: | injection mold core-pulling mechanism mold design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
