Dosimetry of copper-64-labeled monoclonal antibody 1A3 as determined by PET imaging of the torso

We present biodistribution and dosimetry results for 64Cu-benzyl-TETA-MAb 1A3 from 15 human subjects injected with this tracer as determined by serial PET imaging of the torso. METHODS: PET imaging was used to quantify in vivo tracer biodistribution at two time points after injection. Absorbed dosimetry calculated using MIRD-11 and the updated MIRDOSE3 was compared with estimates obtained using rat biodistribution data. RESULTS: By measuring activity concentrations in the torso, and extrapolating for the whole body using standard organ and tissue volumes, we were able to account for 93% of the injected radiopharmaceutical over a range of imaging times from 0 to 36 hr postinjection. Based on PET imaging and the MIRD-11 schema, the liver and spleen are the critical organs with average absorbed doses of 0.12 and 0.10 mGy/MBq (0.44 and 0.39 rad/mCi). The revised MIRDOSE3 scheme yields similar values for these and other organs but also results in a dose of 0.14 mGy/MBq (0.53 rad/mCi) to the heart wall. In the rat, the large intestine is the critical organ at 0.14 mGy/MBq (0.52 rad/mCi), while liver and kidneys each receive 0.11 mGy/MBq (0.41 rad/mCi). Some disparities in absorbed doses determined by these methods are evident but are a result of dissimilar biodistributions in rats and humans. For most organs, rat extrapolated values are higher than the human measurements with PET. CONCLUSION: This study shows that torso PET imaging can quantitatively measure the whole-body biodistribution of a radiopharmaceutical as long as it has relatively slow pharmacokinetics.