The Effect of Phosphazene additives to passivate and stabilize lubricants at the head/disk interface

There have been a number of applications for lubricant additives in the disk drive media area, the first of which was for pseudo-contact recording with inductive heads (tri-pad sliders) in an effort to stabilize the head/disk interface and minimize lube decomposition under hot/wet conditions. A number of additives have been tried which include antioxidants as well as Lewis bases, the latter in an effort to passivate the catalytic activity of the Lewis Acid sites on the slider which results in the decomposition of the perfluoropolyether (PFPE) lubricants such as Z-Dol, AM and Z-Tetraol. In addition to this passivation action of the phosphazene toward catalytic decomposition of the lubricant, it has recently been reported that the use of X-1P (a cyclic phosphazene) also enhances reflow of the lube, increasing the durability of the head disk interface. In this regard there are still a number of unanswered questions that pertain to the mechanism of the interaction of the X-1P with the lubricant and/or carbon to cause this increase in mobility of the lubricant resulting in the enhanced durability.There are numerous technical issues associated with the use of the various additives with the main one being compatibility between the additive and the PFPEs as well as the carbon surfaces on which they are coated. These issues include bonding, phase separation of the components, and the transfer mechanism for the additive to the slider where the passivation is required.In this paper, we will look at the interaction of the X-1P with the carbon overcoat on the media in an effort to try to better understand the mechanism of such an interaction and its effect on the mobility of the lubricant as well as the amount of bonded lube on the disks.