Pressurized hot water extraction with on-line fluorescence monitoring: a comparison of the static,dynamic, and static-dynamic modes for the removal of polycyclic aromatic hydrocarbons from environmental solid samples

A comparison of the feasibility of the three operational modes of pressurized hot solvent extraction (PHSE) (namely, static, where a fixed extractant volume is used; dynamic, where the extractant continually flows through the sample; and static-dynamic mode, which consists of a combination of the two previous modes) for the extraction of polycyclic aromatic hydrocarbons (PAHs) from environmental solid samples (such as soil, sediment, trout, and sardine) has been performed. In all cases, a sodium dodecyl sulfate (SDS) aqueous solution was used as leaching agent. The use of a flow injection manifold between the extractor and a molecular fluorescence detector allowed real-time on-line fluorescence monitoring of the PAHs extracted from the samples, thus working as a screening system and providing qualitative and semiquantitative information on the target analytes extracted from both natural and spiked samples. The on-line monitoring option allowed the extraction kinetics to be monitored and the end of the leaching step to be determined independently of the sample matrix, thereby reducing extraction times. Efficiencies close to 100% have been provided by the three modes, which differ in the extraction time required for total removal of the target compounds. The time needed for the dynamic mode was shorter than that for the static mode. However, the establishment of a static extraction step prior to dynamic extraction was the key to shorten the time required for complete extraction. The method has been applied to a certified reference material (CRM 524, BCR, industrial soil/organics) for quality assurance/validation.