| 焊接凝固裂纹数值模拟的研究及其进展 |
| |
| 引用本文： | 董志波,魏艳红,刘仁培. 焊接凝固裂纹数值模拟的研究及其进展[J]. 焊接, 2005, 0(11): 19-23 |
| |
| 作者姓名： | 董志波 魏艳红 刘仁培 |
| |
| 作者单位： | 哈尔滨工业大学现代焊接生产技术国家重点实验室,150001;南京航空航天大学,210016 |
| |
| 摘 要： | 焊接凝固裂纹的产生与否取决于两个方面的因素,材料凝固裂纹阻力和凝固裂纹驱动力,凝固裂纹阻力可以通过试验方法来获得,而凝固裂纹驱动力主要采用有限元计算方法得到.对焊接凝固裂纹的形成机理、凝固裂纹驱动力曲线和焊接凝固裂纹阻力曲线的试验测量方法的数值模拟,以及防止凝固裂纹方法的数值模拟过程都进行了总结及展望.
|
| 关 键 词： | 凝固裂纹 驱动力 凝固裂纹阻力 数值模拟 |
| 收稿时间： | 2005-09-29 |
| 修稿时间： | 2005-09-29 |
RESEARCH AND PROGRESS ON THE NUMERICAL SIMULATION OF THE WELDING SOLIDIFYING CRACKING |
| |
| Dong Zhibo,Wei Yanhong,Liu Renpei. RESEARCH AND PROGRESS ON THE NUMERICAL SIMULATION OF THE WELDING SOLIDIFYING CRACKING[J]. Welding & Joining, 2005, 0(11): 19-23 |
| |
| Authors: | Dong Zhibo Wei Yanhong Liu Renpei |
| |
| Affiliation: | 1.State Key Lab of Advanced Welding Production Technology, HIT;2. Nanjing University of Aeronautics and Astronautics |
| |
| Abstract: | The formation of the welding solidifying cracking results from the two factors, the resistance to cracking of the material and the driving force to craeking. The resistance to cracking of the material can be obtained by experiments, while the driving force to cracking can be calculated by the numerical simulation method.The progress and direction of the investigation on the welding solidifying cracking were reviewed and previewed. |
| |
| Keywords: | sofidifying cracking driving force resistance to cracking numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
