Phase-field simulation of solidification dendritic segregation in Ti-45Al alloy

The microstructures and mechanical properties of TiAl alloys are directly linked to micro-segregation which cannot be avoided during solidification. So a thorough understanding of the micro-segregation should be a great help to further enhance the mechanical properties of the cast products. Theoretical analysis and experiments have been used to predict the micro-segregation, but it is very difficult to observe and determine the dendritic segregation in the micro region. Phase-field method has been employed for the simulation of dendritic growth.However, due to the complicated quasi-sub regular solution model for Ti-45Al(at.%) alloy, the classic phase-field models have difficulty to deal with the free energy. In this work, a phase-field model by linking thermodynamic calculation was used to simulate solidification dendritic segregation of Ti-45Al alloy for Liquid→Liquid+β(Ti). The free energies of solid phase and liquid phase for Ti-45Al alloy were calculated by Thermo-Calc and then coupled with the phase-field equations. The simulation results show the dendritic morphology and Al content variations between liquid and growing solid phase for Ti-45Al alloy. With the growth of the β(Ti), dendritic segregation is formed in the liquid and solid phases due to the solute partitioning and rejection into the liquid. As a result, the dendrite arms are depleted of Al element, while the inter-dendrites are enriched. The dendritic tip growth velocity decreases with the progress of solidification, whereas the segregation ratio increases.