| 基于I-DEAS的数字化工厂建模技术研究 |
| |
| 引用本文： | 吴斌,喻洪平,秦东兴,刘宇. 基于I-DEAS的数字化工厂建模技术研究[J]. 工具技术, 2009, 43(7): 68-71 |
| |
| 作者姓名： | 吴斌 喻洪平 秦东兴 刘宇 |
| |
| 作者单位： | 成都大学;电子科技大学 |
| |
| 摘 要： | 针对大型工厂的数字化建设中的底层模型开发技术,提出了基于I-DEAS的三维实体模型的计算几何学表达。研究了CAD建模技术:参数化设计技术和变量化设计技术,及这两种建模技术的约束求解方式,提出了基于参数驱动的工厂配置约束方法和配置管理技术。
|
| 关 键 词： | 数字化工厂 建模技术 约束求解 I-DEAS |
Research of Modeling Technologies of Digitalized Factory Based on I-DEAS |
| |
| Wu Bing,Yu Hongping,Qin Dongxing,Liu Yu. Research of Modeling Technologies of Digitalized Factory Based on I-DEAS[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2009, 43(7): 68-71 |
| |
| Authors: | Wu Bing Yu Hongping Qin Dongxing Liu Yu |
| |
| Abstract: | In this paper based on I-DEAS the bottom model have been developed in designing large-scale factory field. CAD modeling technology is researched by way of computational geometry,including parametric design,variational design and their constraint resolution algorithms. And factory configuration constraint relations and configuration management technology are presented,which are based on parameters driven. |
| |
| Keywords: | I-DEAS digitalized factory modeling technology constrained resolution I-DEAS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
