| 大型铣钻专用机床的动力学分析 |
| |
| 引用本文： | 柯春松,刘红娟,范进桢,王小纯. 大型铣钻专用机床的动力学分析[J]. 机械设计与研究, 2009, 25(4): 106-109. DOI: 10.13952/j.cnki.jofmdr.a2279 |
| |
| 作者姓名： | 柯春松 刘红娟 范进桢 王小纯 |
| |
| 作者单位： | 宁波职业技术学院机电学院,宁波,315800;广西大学机械工程学院,南宁,530004 |
| |
| 摘 要： | 采用CAD/CAE/MSS技术对铣钻专用机床进行动力学分析。首先,在Pro/E中建立机床三维实体模型;然后在ADAMS/View形成虚拟样机模型,对机床进行运动学和动力学分析,得出机床导轨的接触力曲线;最后以接触力作为边界条件,用ANSYS对导轨进行应力应变分析,得出机床的静态特性和动态特性。从而提高了专用机床设计成功率、减少了设计周期。
|
| 关 键 词： | ANSYS ADAMS 动力学仿真 虚拟样机 |
The Design of Large-scale Special Milling and Drilling Machine Based on CAD/CAE/MSS |
| |
| KE Chun-song,LIU Hong-juan,FAN Jin-zhen,WANG Xiao-chun. The Design of Large-scale Special Milling and Drilling Machine Based on CAD/CAE/MSS[J]. Machine Design and Research, 2009, 25(4): 106-109. DOI: 10.13952/j.cnki.jofmdr.a2279 |
| |
| Authors: | KE Chun-song LIU Hong-juan FAN Jin-zhen WANG Xiao-chun |
| |
| Affiliation: | 1.College of Mechanical and Electrical Engineering;Ningbo Polytechnic;Ningbo315800;China;2.College of Mechanical Engineering;Guangxi University;Nanning530004;China |
| |
| Abstract: | Dynamics analysis of the special milling and drilling machine is carried out by using CAD/CAE/MSS.Firstly,a 3D solid model of the machine is developed by Pro/E software.Secondly the solid model is introduced into ADAMS/View to form a virtual prototyping model for simulation,and the contact force curves of the machine guede way are obtceined after analyzing the machine kinematically and dynamically Finally both the static and dynamic characteristics are got by using ANSYS to analyze stress-strain of the mach... |
| |
| Keywords: | ANSYS ADAMS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机械设计与研究》浏览原始摘要信息 |
|
点击此处可从《机械设计与研究》下载全文 |
|
