| 薄煤层综采面工艺方式选择及参数优化 |
| |
| 引用本文： | 张立俊. 薄煤层综采面工艺方式选择及参数优化[J]. 煤矿开采, 2006, 11(4): 32-34 |
| |
| 作者姓名： | 张立俊 |
| |
| 作者单位： | 枣庄矿业(集团)有限责任公司,滨湖煤矿,山东,枣庄,277515 |
| |
| 摘 要： | 通过计算机模拟、优化和现场实测,对薄煤层综采工艺方式进行了改造和创新,优化了薄煤层综采工艺方式。研究和实测结果表明,在薄煤层工作面采用单向割煤、中部斜切进刀方式,不但降低了工人的劳动强度,而且减少了循环作业时间,提高了生产进度和效益。
|
| 关 键 词： | 薄煤层综采面 工艺方式 参数优化 |
| 文章编号： | 1006-6225(2006)04-0032-03 |
| 收稿时间： | 2006-04-24 |
| 修稿时间： | 2006-04-24 |
Craft Manner Selection and Parameters Optimization of Full-mechanized Mining Face in Thin Coal Seam |
| |
| ZHANG Li-jun. Craft Manner Selection and Parameters Optimization of Full-mechanized Mining Face in Thin Coal Seam[J]. Coal Mining Technology, 2006, 11(4): 32-34 |
| |
| Authors: | ZHANG Li-jun |
| |
| Affiliation: | Binghu Colliery, Zaozhuang Mining Co. Ltd, Zaozhuang 277515, China |
| |
| Abstract: | The craft manner of full-mechanized mining in thin coal seam is reformed and optimized by computer simulation,optimization and spot test in this paper.The research and test results show that single-direction mining and slope cutting in the middle of face may reduce workers' labor,shorten the working looping time,fasten the working schedule and improve efficiency. |
| |
| Keywords: | full-mechanized mining in thin coal seam craft manner parameter optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
