Macro- and nanotribological properties of organosilane monolayers prepared by a chemical vapor adsorption method on silicon substrates

Organosilane monolayers are novel ultrathin films used to control the physicochemical properties, such as friction and wear, of solid surfaces. In this study, the authors prepared alkylsilane and fluoroalkylsilane monolayers with a series of chain lengths by a chemical vapor adsorption method. The monolayers tribological properties were investigated by lateral force microscope (LFM) and friction tester. LFM nanoscale measurements of tribological properties showed that alkylsilane monolayer gave lower lateral force than the Si substrate surface. The lateral force decreased as the length of the alkyl chain increased. On the macroscale, friction test revealed that the organosilane monolayers gave lower dynamic friction coefficients than the Si substrate surface in air at room temperature. The longer the alkyl chain, the greater the wear resistance of the organosilane monolayers. Friction experiments using tetradecane as a lubricant showed better tribological properties than were obtained in air. Furthermore, microscopically line-patterned two-component organosilane monolayers were prepared and their macroscopic friction behavior was investigated. Even though the height difference between the two-components was less than 1 nm, friction force anisotropy between the parallel and perpendicular directions against the line pattern was observed.