Effect of Xylene Formaldehyde Resins on Epoxy Resin Adhesive

The effect of some types of xylene formaldehyde on epoxy resin adhesive is studied. Xylene formaldehyde resin or modified xylene formaldehyde resins are mixed into liquid epoxy resin and curing properties of the blends, their adhesive properties and the dispersion state of xylene formaldehyde resin in cured adhesive film are examined. The results obtained are as follows.

1) Generally, by the addition of xylene formaldehyde resins, the degree of curing of blends are decreased, but pot life is prolonged, and tensile shear strength of steel bonds is increased.

2) It is observed that effects of the amount of xylene formaldehyde resins and curing condition on tensile shear strength vary with the kind of xylene formaldehyde resin, because of the difference in chemical structure of xylene formaldehyde resins and their reactivity to epoxy resin.

3) It is found that a limited region of compatibility, between 80 and 100 phr, exists for 100% xylene formaldehyde resin in epoxy resin. It is also found that joint strength is reduced with higher viscosity and molecular weight of 100% xylene formaldehyde resin in the case of 80 phr blends, and that these results have some relation to the dispersion state of xylene formaldehyde resin in epoxy resin, judging from the cured adhesive film observed under a phase contrast microscope.