Soft‐fault diagnostic method based on locus circle of steady‐state node‐voltage vector

This study describes a relationship between an element parameter and a fault feature steady‐state node‐voltage vector (SSNVV). The locus of the SSNVV endpoints is proposed and proven to be an arc of circle under certain conditions, whereas the element parameter varies from small to large within a certain range. The arc of circle is called locus circle of SSNVV (LCoSSNVV). An LCoSSNVV‐based soft‐fault diagnostic method is also proposed. The method utilizes three discrete SSNVV endpoints to draw an LCoSSNVV for each element and collects all LCoSSNVVs to produce an LCoSSNVV set for fault diagnosis. In the following diagnostic process, the method measures a fault feature SSNVV of actual faulty circuit and judges which element is faulty on the basis of the relationship between the measured fault feature SSNVV and the LCoSSNVVs in an LCoSSNVV set. Subsequently, the fault can be further subdivided into different types of soft faults on the basis of the relative position of the SSNVV on the LCoSSNVV. A range of the faulty element parameter value can be estimated. Several examples illustrate the method. A measurement solution of SSNVV and a solution of a programming strategy are described. The new LCoSSNVV‐based method would effectively improve the soft‐fault diagnosis process of a linear time‐invariant circuit network. Copyright © 2015 John Wiley & Sons, Ltd.