A single‐stage LED streetlight driver with PFC and digital PWM dimming capability

This paper proposes a single‐stage light‐emitting diode (LED) driver that offers power‐factor correction and digital pulse–width modulation (PWM) dimming capability for streetlight applications. The presented LED streetlight driver integrates an alternating current–direct current (AC–DC) converter with coupled inductors and a half‐bridge‐type LLC DC–DC resonant converter into a single‐stage circuit topology. The sub‐circuit of the AC–DC converter with coupled inductors is designed to be operated in discontinuous‐conduction mode for achieving input‐current shaping. Zero‐voltage switching of two active power switches and zero‐current switching of two output‐rectifier diodes in the presented LED driver decrease the switching losses; thus, the circuit efficiency is increased. A prototype driver for powering a 144‐W‐rated LED streetlight module with input utility‐line voltages ranging from 100 to 120 V is implemented and tested. The proposed streetlight driver features cost‐effectiveness, high circuit efficiency, high power factor, low levels of input‐current harmonics, and a digital PWM dimming capability ranging from 20% to 100% output rated LED power, which is fulfilled by a micro‐controller. Satisfying experimental results, including dimming tests, verify the feasibility of the proposed LED streetlight driver. Copyright © 2016 John Wiley & Sons, Ltd.