| 提高1422mm平整机工作辊轧制周期的研究 |
| |
| 引用本文： | 吴宁,章欣. 提高1422mm平整机工作辊轧制周期的研究[J]. 金属材料与冶金工程, 2010, 38(3): 12-14 |
| |
| 作者姓名： | 吴宁 章欣 |
| |
| 作者单位： | 宝钢集团梅山钢铁公司,江苏,南京,210039 |
| |
| 摘 要： | 热轧平整机在轧制过程中通常遵循带钢轧制宽度从＂宽到窄＂原则,但目前安排精整作业计划时,不可能完全满足＂从宽到窄＂的轧辊使用原则,这样就造成了轧辊更换频率的增加。通过现场实践、论证,适时调整带钢宽度、厚度,提高了平整机工作辊的轧制周期。
|
| 关 键 词： | 轧辊使用原则 宽度、厚度适时调整 工作辊 轧制周期 |
Study on Increasing Rolling Cycle of the Working Roller of 1422 mm Smoothing Engine |
| |
| WU Ning,ZHANG Xin. Study on Increasing Rolling Cycle of the Working Roller of 1422 mm Smoothing Engine[J]. Metal Materials And Metallurgy Engineering, 2010, 38(3): 12-14 |
| |
| Authors: | WU Ning ZHANG Xin |
| |
| Affiliation: | (Meishan Iron ＆ Steel Co.,Baoshan Iron ＆ Steel Group Co.,Nanjing 210039,China) |
| |
| Abstract: | The hot-rolling smoothing engine in the rolling process has to follow out normally the rule of strip width from the wide to narrow,but then arranging finishing operation plan at present,it can not fully meet the roller using rule from wide to narrow,thus leads to the rollers replace frequently.Through field practice,demonstration,adjusting timely strip width,thickness,enhances the rolling cycle of smoothing engine working roller. |
| |
| Keywords: | using rule of roller width thickness timely adjusting working roller rolling cycle |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
