首页 | 本学科首页   官方微博 | 高级检索  
     

一种抗微波干扰防腐蚀的温度传感器
引用本文:曾永春,黄喜庆,李明伟,李承斌. 一种抗微波干扰防腐蚀的温度传感器[J]. 真空电子技术, 2013, 0(6): 23-27
作者姓名:曾永春  黄喜庆  李明伟  李承斌
作者单位:[1]大连博控科技股份有限公司,辽宁大连116023 [2]大连理工大学信息与通信工程学院,辽宁大连116024 [3]65044部队,辽宁大连116021
摘    要:目前在微波化学装置中所使用的温度传感器的抗干扰能力多是在低功率下才会有效的。但是如果微波功率达到10kW以上的时候,大部分的温度传感器就不能够胜任了。本文研究了一种基于Pt100铂电阻的温度传感器,它在10kW以上的微波场里的屏蔽衰减达到了100dB以上;能够直接与微波化学实验中的腐蚀性物料接触,而不会被腐蚀;并且它的成本远远低于现阶段同功能的温度传感器。填补了这一领域的空白。

关 键 词:微波  化学  温度传感器  抗干扰  防腐蚀

An Anti-Microwave Interference and Anti-Corrosion Temperature Sensor
ZENG Yong-chun,HUANG Xi-qing,LI Ming-wei,LI Cheng-bin. An Anti-Microwave Interference and Anti-Corrosion Temperature Sensor[J]. Vacuum Electronics, 2013, 0(6): 23-27
Authors:ZENG Yong-chun  HUANG Xi-qing  LI Ming-wei  LI Cheng-bin
Affiliation:1. Dalian Bocon Science &Technology Co, Ltd, Dalian 116023, China; 2. School of Information and Communication Engineering ( SICE) , Dalian University of Technology, Dalian 116024, China; 3. Troop 65044, Dalian 116021, China)
Abstract:At present, the temperature sensors used in the microwave chemical apparatus,is only effec- tiveinantiqnterference under low microwave power. Once microwave power reaches more than 10 kW, most of the temperature sensors will fail. In this paper, we present a kind of temperature sensors based on Ptl00 platinum resistor, applicable to an environment where above 10 kW of microwave field exists, due to a screening attenuation of more than 100 dB. This sensor can also be in direct contactwith corrosive materials in microwave chemicalapparatus without being corroded. In addition, its cost is much lower than the similartemperature sensor availablein this stage.
Keywords:Microwave   Chemical device   Temperature Sensor   Anti-interference   Anti-corrosion
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号