首页 | 本学科首页   官方微博 | 高级检索  
     

风机风能密度增加装置的设计
引用本文:丁顺良,郭子航,黄宜坤,郝凯,郑卫刚. 风机风能密度增加装置的设计[J]. 有色冶金节能, 2011, 27(5): 53-56
作者姓名:丁顺良  郭子航  黄宜坤  郝凯  郑卫刚
作者单位:武汉理工大学能源与动力工程学院,武汉,430063
基金项目:武汉理工大学自主创新研究基金(444-20510005)
摘    要:如何更经济地提高风机的单机容量是风力发电的核心问题之一。本文根据流体力学的基本原理,研制了一种收缩喷管状的"风能密度增加装置";使风吹到风机叶片之前在风速增加管中进行加速,从而增加风能密度。试验结果表明:出风口处风速是进风口的1.9倍,风能密度提高为6.9倍,总动能变为1.74倍。动能的增加量是由于进风口处的部分压力能转化为出风口处的动能。由于风机的单机容量与风能密度成正比,因此该装置可以成倍的提高风机的单机容量。

关 键 词:风速增加管  风能密度  收缩喷管  单机容量

Design of Wind Energy Density Increasing Device of Fan
DING Shun-liang,GUO Zi-hang,HUANG Yi-kun,HAO Kai,ZHENG Wei-gang. Design of Wind Energy Density Increasing Device of Fan[J]. Energy Saving Of Non-Ferrous Metallurgy, 2011, 27(5): 53-56
Authors:DING Shun-liang  GUO Zi-hang  HUANG Yi-kun  HAO Kai  ZHENG Wei-gang
Affiliation:DING Shun-liang,GUO Zi-hang,HUANG Yi-kun,HAO Kai,ZHENG Wei-gang
Abstract:One of the key problems existed in power generation with wind energy is how to economically increase the single-machine capacity of fan.A shrinkage nozzle type device of increasing wind energy density was developed according to the basic principle of hydrodynamics,which increased the wind energy density by accelerating in tube of increasing wind speed before the wind blew to blade of fan.The test results showed that the wind speed at air outlet was 1.9 times higher than at air inlet,the wind density increas...
Keywords:tube of increasing wind speed  wind energy density  shrinkage nozzle  single-machine capacity  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号