| 热处理工艺对17-4PH钢滞后性能的影响 |
| |
| 引用本文： | 朱向群,戴起勋,周明,高秀者. 热处理工艺对17-4PH钢滞后性能的影响[J]. 材料热处理学报, 2009, 30(6): 57-60 |
| |
| 作者姓名： | 朱向群 戴起勋 周明 高秀者 |
| |
| 作者单位： | 江苏大学材料科学与工程学院,江苏,镇江,212013;江苏大学材料科学与工程学院,江苏,镇江,212013;江苏大学材料科学与工程学院,江苏,镇江,212013;江苏大学材料科学与工程学院,江苏,镇江,212013 |
| |
| 基金项目： | 江苏省自然科学基金，常州市国际科技合作人才支持计划 |
| |
| 摘 要： | 采用电阻应变计传感器设计原理,研究热处理工艺对17-4PH钢滞后特性影响,通过透射电镜、内耗测试等技术分析了热处理影响17-4PH钢滞后的原因,并探讨了滞后形成机理.结果表明,随应变增加,17-4PH钢模量亏损、内耗和滞后变大;提高强度和时效前的深冷处理能降低17-4PH钢滞后;滞弹性和微区形变引起17-4PH钢滞后.
|
| 关 键 词： | 热处理 17-4PH钢 弹性体 滞后性能 |
Effect of heat treatment on hysteresis property of 17-4PH steel |
| |
| ZHU Xiang-qun,DAI Qi-xun,ZHOU Ming,GAO Xiu-zhe. Effect of heat treatment on hysteresis property of 17-4PH steel[J]. Transactions of Materials and Heat Treatment, 2009, 30(6): 57-60 |
| |
| Authors: | ZHU Xiang-qun DAI Qi-xun ZHOU Ming GAO Xiu-zhe |
| |
| Abstract: | The fundamental of load cell for resistance strain gage was adopted to investigate hysteresis property of 17-4PH steel treated with different heat treatment process, and the effect of heat treatment on microstructure and hysteresis property of 17-4PH steel was examined by transmission electron microscopy (TEM) and internal friction measurement. It is shown that modulus of elasticity decreases, and internal friction and hysteresis increase with the increase of strain for 17-4PH steel. Hysteresis of 17-4PH steel is decreased by enhancing its strength and cryogenic cooling treatment before ageing. Hysteresis of 17-4PH steel arises from anelasficity and deformation of micro zones in the spring element. |
| |
| Keywords: | heat treatment 17-4PH steel spring element hysteresis property |
| 本文献已被 万方数据 等数据库收录！ |
|
