首页 | 本学科首页   官方微博 | 高级检索  
     

浮空器用柔性复合材料的力学性能
引用本文:窦宝峰,;逄型召,;王兆希,;张小亮.浮空器用柔性复合材料的力学性能[J].理化检验(物理分册),2009(12):740-743.
作者姓名:窦宝峰  ;逄型召  ;王兆希  ;张小亮
作者单位:[1]清华大学工程力学系,北京100084; [2]山东省临沂市建设安全工程质量监督管理处,山东临沂276000; [3]北京住总集团有限责任公司,北京100022; [4]北京工业职业技术学院,北京100042
基金项目:中国博士后科学基金资助项目(20090450161).
摘    要:通过试验研究了某浮空器蒙皮用柔性复合材料的基本力学性能和断裂力学性能。通过单轴拉伸试验研究了该材料经向和纬向试样的力学特性,结果发现两者的弹性模量均在10GPa左右,复合材料的柔软度很高;而经向拉伸试样的抗拉强度比纬向拉伸试样的高出约32%;通过改变切口相对宽度的撕裂试验发现撕裂试验的载荷一位移曲线和裂纹扩展特性基本表现为脆性断裂特性,试验结果和根据弹塑性断裂理论计算得到的结果相一致,即随着切口相对宽度的增加,柔性复合材料的极限载荷降低。

关 键 词:柔性复合材料  拉伸性能  撕裂性能

Mechanical Properties of Flexible Composite Materials for Aerostat
Affiliation:DOU Bao-feng, PANG Xing-zhao, WANG Zhao-xi, ZHANG Xiao-liang(1. Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China;2. Linyi Construction Bureau, Linyi 276000, China;3. Beijing Uni-construction Group Co. , LTD. , Beijing 100022, China;4. Beijing Polytechnic College, Beijing 100042, China)
Abstract:The basic mechanical properties and the fracture properties were investigated on the flexible composite materials for the aerostat by experiments. The mechanical experiments with both the longitude and the latitude loading directions were performed. From the experimental results, it was found that the Young's modulus of both kinds was about 10 GPa, and the ultimate strength of longitude direction was much larger than that of the latitude direction. With the varying width of the notch, the fracture properties of the material were investigated. It was found that the load-deflection properties and the crack propagation properties displayed typical brittle fracture. The experimental results and the elastic-plastic fracture results show that the ultimate loading level decreased with the increase of the ratio of the notch width to the specimen width.
Keywords:flexible composite materials  tensile properties  tearing properties
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号