|
|||||
|
|
| 9%Ni钢斜Y形坡口裂纹试验的数值模拟 | |
| 引用本文： | 白世武,李午申,严春妍,尹长华,黄福祥.9%Ni钢斜Y形坡口裂纹试验的数值模拟[J].焊接学报,2009,30(12):93-96. |
| 作者姓名： | 白世武 李午申 严春妍 尹长华 黄福祥 |
| 作者单位： | 1. 天津大学,材料科学与工程学院,天津,300072;中国石油天然气管道科学研究院,河北,廊坊,065000 2. 天津大学,材料科学与工程学院,天津,300072 3. 天津大学,材料科学与工程学院,天津,300072;河海大学,机电工程学院,江苏,常州,213022 4. 中国石油天然气管道科学研究院,河北,廊坊,065000 |
| 摘 要： | 利用 SYSWELD 有限元计算软件,采用双椭球焊接热源模型,对 9%Ni 钢斜 Y 形坡口裂纹试验中不同预热温度下的试件进行了焊接温度场和应力场的数值模拟.研究了试件的焊接温度场和应力场的分布规律,分析了预热温度对焊接热过程和焊后残余应力的影响.结果表明,提高预热温度时,一方面焊后冷却速度降低,有利于氢的逸出和马氏体的自回火作用;另一方面,横向残余应力水平增加,试件总体应力水平增加,冷裂纹敏感性增加.因此,焊接 9%Ni 钢时,不宜采用过高的预热温度. |
| 关 键 词： | 9％Ni钢 斜Y形坡口裂纹试验 预热温度 温度场 应力场 |
| 收稿时间： | 2008/11/14 0:00:00 |
Numerical simulation of slit type cracking test for 9%Ni steel |
|
| BAI Shiwu,LI Wushen,YAN Chunyan,YIN Zhanghua and HUANG Fuxiang.Numerical simulation of slit type cracking test for 9%Ni steel[J].Transactions of The China Welding Institution,2009,30(12):93-96. | |
| Authors: | BAI Shiwu LI Wushen YAN Chunyan YIN Zhanghua and HUANG Fuxiang |
| Affiliation: | School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China;Petroleum-Gas Pipeline Research Institute of China, Langfang 065000, China,School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China,School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China;College of Mechanical and Electrical Engineering, Hohai University, Changzhou 213022, China,Petroleum-Gas Pipeline Research Institute of China, Langfang 065000, China and Petroleum-Gas Pipeline Research Institute of China, Langfang 065000, China |
| Abstract: | With SYSWELD software, the temperature and stress field of 9% Ni steel Y-slit weldments with different preheat temperatures were simulated by applying double-ellipsoid heat source. Distribution laws of welding temperature and stress field were studied. Effects of preheat temperature on welding heat cycles and residual stress were analyzed. Results show that with increasing preheat temperature, cooling rate decreases facilitates escaping of hydrogen and self-tempering of martensite, the average stress level and cold-cracking susceptibility of the weldments increase, so high preheat temperature shall be avoided for 9% Ni steel welding. |
| Keywords: | 9％ Ni steel slit type cracking test preheat temperature temperature field stress field |
| 本文献已被 万方数据 等数据库收录！ | |
| 点击此处可从《焊接学报》浏览原始摘要信息 | |
| 点击此处可从《焊接学报》下载全文 | |