Experimental evaluation of geosynthetics as reinforcement for shotcrete |
| |
Authors: | R. Moffat C. Jadue J.F. Beltran R. Herrera |
| |
Affiliation: | 1. Department of Civil Engineering, Universidad Adolfo Ibañez, Santiago, Chile;2. Petrus Geotechnical Consulting, Dr. Roberto del Rio 1245, Providencia, Santiago, Chile;3. Department of Civil Engineering, University of Chile, Blanco Encalada 2002, Santiago, Chile |
| |
Abstract: | One of the commonly used stabilization systems for rock tunnels is shotcrete. This fine aggregate mortar is usually reinforced for improving its tensile and shear strength. In deep tunnels, its capacity to absorb energy has been recently considered for design purposes, as large displacements of the wall are expected. Two of the most used materials of reinforcement are steel welded-wire mesh and fibers (steel or polypropylene) in the shotcrete mix. This study presents the results and discussion of an experimental test program conducted to obtain the load-deformation curves of reinforced shotcrete, according to ASTM C 1550, using geosynthetics grids and geotextiles as alternative reinforcement materials. In addition, plain shotcrete and steel welded-wire mesh reinforced shotcrete specimens are also considered in the experimental program as benchmark cases. The experimental results are analyzed in terms of maximum strength and toughness. Results show that the use of geosynthetics as a reinforcement material is a promising alternative to obtain shotcrete with energy absorption capacity comparable with the most common reinforcement materials used. |
| |
Keywords: | Geosynthetics Shotcrete Geosynthetics reinforcement Energy absorption Shotcrete strength |
本文献已被 ScienceDirect 等数据库收录! |
|