| 低压注射成型工艺的研究进展 |
| |
| 引用本文： | 张学军,郑永挺,韩杰才. 低压注射成型工艺的研究进展[J]. 材料科学与工艺, 2007, 15(1): 79-82,86 |
| |
| 作者姓名： | 张学军 郑永挺 韩杰才 |
| |
| 作者单位： | 哈尔滨工业大学,复合材料与结构研究所,黑龙江,哈尔滨,150001 |
| |
| 基金项目： | 国家高技术研究计划发展专项经费 |
| |
| 摘 要： | 低压注射成型(LPIM)是高效、经济的近净形成型工艺.综述了LPIM工艺的特点及其优势,总结了LPIM的发展研究状况,并对其发展前景作了展望.
|
| 关 键 词： | 低压注射成型 近净形 成型工艺 |
| 文章编号： | 1005-0299（2007）01-0079-04 |
| 修稿时间： | 2004-09-01 |
Progress on low pressure injection molding |
| |
| ZHANG Xue-jun,ZHENG Yong-ting,HAN Jie-cai. Progress on low pressure injection molding[J]. Materials Science and Technology, 2007, 15(1): 79-82,86 |
| |
| Authors: | ZHANG Xue-jun ZHENG Yong-ting HAN Jie-cai |
| |
| Affiliation: | Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China |
| |
| Abstract: | Low pressure injection molding(LPIM) is a cost effective near-net shape forming process,which has attracted attention for its low operating temperature and pressure,low requirement for machine and die,short debinding time,and low cost etc.The characteristics and advantages of LPIM and its status of development were summarized.And also,the foreground of LPIM was proposed. |
| |
| Keywords: | LPIM near-net shape forming process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
