首页 | 本学科首页   官方微博 | 高级检索  
     

电爆网路在高电磁场地区岩石爆破中的应用
引用本文:翟国锋,杨智旭,唐献述. 电爆网路在高电磁场地区岩石爆破中的应用[J]. 工程爆破, 2010, 16(2): 91-93
作者姓名:翟国锋  杨智旭  唐献述
作者单位:桂林空军学院二系,广西桂林,541003;解放军理工大学爆破技术研究所,南京,210007
摘    要:电爆网路目前仍然在工程中被采用。结合爆破工程施工规模和现场布孔情况,必须对网路电阻进行严格的设计和计算,并进行实测,进而确定安全有效的起爆网路。计算和施工结果表明,在高电磁场区域,根据每个工作面爆破规模大小,一般考虑排间并联,排内串联。当爆破规模达到2万方以上、工作面为2~3个时,计算要使通过每个电雷管的电流不小于2.5mA,可以采用2组并联、组内串联方式起爆。同时,工作面杂散电流应不大于30mA。

关 键 词:电爆网路  电磁场区域  岩石爆破  应用

APPLICATION OF ELECTRIC DETONATING NET TO ROCK BLASTING IN HIGH ELECTROMAGNETIC AREA
ZHAI Guo-feng,YANG Zhi-xu,TANG Xian-shu. APPLICATION OF ELECTRIC DETONATING NET TO ROCK BLASTING IN HIGH ELECTROMAGNETIC AREA[J]. Engineering Blasting, 2010, 16(2): 91-93
Authors:ZHAI Guo-feng  YANG Zhi-xu  TANG Xian-shu
Affiliation:ZHAI Guo-feng1,YANG Zhi-xu2,TANG Xian-shu1(1.Guilin Air Force Academy of PLA,Guilin 541003,Guangxi,China,2.Blasting Technology Research Institute,PLA Science & Technology College,Nanjing 210007,China)
Abstract:Electric detonating circuit is still mostly adopted in engineering project now.Combined with construction scale and on-site hole disposal,the circuit resistance must be designed and calculated seriously to decide safety and effective detonating circuit.The result indicated that parallel connection among the line and series connection within the line shall be generally considered in high electromagnetic area based on the blasting scale of each working face.When the blasting scale came up to over 20000m3 with...
Keywords:Electric detonating circuit  Electromagnetic field  Rock blasting  Application  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号