| CAPL平整工艺参数合理化研究 |
| |
| 引用本文： | 黄自友,李胜祗,孙中建,林大为.CAPL平整工艺参数合理化研究[J].安徽工业大学学报,1994(2). |
| |
| 作者姓名： | 黄自友 李胜祗 孙中建 林大为 |
| |
| 作者单位： | 宝钢冷轧厂(黄自友)，华东冶金学院(李胜祗，孙中建，林大为) |
| |
| 摘 要： | 本文以Ｂｌａｎｄ－Ｆｏｒｄ—Ｈｉｌｌ理论公式为基础构造了半经验平整轧制为模型，在模型中，以Ｈｉｔｃｈｃｏｃｋ所提出的两个圆柱体接触的变形理论来确定变形区长度，模型反映了带钢变形抗力、外摩擦及带钢张力对轧制力的影响。据此模型，本文给出了平整轧制力及张力设定规范。
|
| 关 键 词： | 连续退火 平整 轧制力模型 |
Research on the Rationalization of Process Parameters of the Temper Rolling in CAPL |
| |
| Huang Ziyou, Li Shengzhi, Sun Zhougjian, Lin Dawei.Research on the Rationalization of Process Parameters of the Temper Rolling in CAPL[J].Journal of Anhui University of Technology,1994(2). |
| |
| Authors: | Huang Ziyou Li Shengzhi Sun Zhougjian Lin Dawei |
| |
| Affiliation: | Huang Ziyou; Li Shengzhi; Sun Zhougjian; Lin Dawei (BAOGANG Cold Rolling Mill Plant) (ECIM) |
| |
| Abstract: | Based on Bland-Ford-Hill formular. a semiempirical model of temper ro-. lling force is formed in this paper. In the model. the length of deformation zone is determined by means of Hitchcock theory and the influences of deformation resistence, surface friction and strip tension on rolling force are presented. Standards of setting temper rolling force and strip tension are presented. |
| |
| Keywords: | Continuous annealing Temper Rolling force model |
| 本文献已被 CNKI 等数据库收录！ |
