| 基于模型的嵌入式代码快速生成 |
| |
| 引用本文： | 翁公羽,刘杰.基于模型的嵌入式代码快速生成[J].单片机与嵌入式系统应用,2011,11(3):12-14. |
| |
| 作者姓名： | 翁公羽 刘杰 |
| |
| 作者单位： | 福州大学物理与信息工程学院,福州,350002 |
| |
| 摘 要： | 采用一种有别于传统嵌入式系统开发过程的新型开发方法:从概念到实现.以一个简单的乘法为例,利用Simulink、Embedded MATIAB、Real-Time Workshop等工具,在MATLAB平台上一次性完成从算法模型仿真到嵌入式代码生成的过程.之后在生成的代码中添加硬件接口并编译,经Proteus虚拟硬件测试...
|
| 关 键 词： | 基于模型 Embebedded MATLAB Real-Time Workshop |
Model-based Rapid Embedded Code Generation |
| |
| Weng Gongyu,Liu Jie.Model-based Rapid Embedded Code Generation[J].Microcontrollers & Embedded Systems,2011,11(3):12-14. |
| |
| Authors: | Weng Gongyu Liu Jie |
| |
| Affiliation: | (College of Physics ＆ Information Engineering, Fuzhou University, Fuzhou 350002, China) |
| |
| Abstract: | This paper applies a new method that differs from the traditional one： from concept to implementation. Taking a simple multiplication for example, it can be done on the MATLAB platform using Simulink, Embedded MATLAB and Real-Time Workshop products. Then hardware interface is inserted to the codes generated, and these codes are compiled and tested in the Proteus virtual hardware environment, getting the expected result. It has been proved that this method can not only significantly reduce the time for developing the embedded system, but also guarantee the reliability and efficiency of the codes. |
| |
| Keywords: | model based Embedded MATLAB Real Time Workshop |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
