| 基于Z-Stack的WSN节点中断程序设计 |
| |
| 引用本文： | 黄真.基于Z-Stack的WSN节点中断程序设计[J].单片机与嵌入式系统应用,2011,11(7):79-81. |
| |
| 作者姓名： | 黄真 |
| |
| 作者单位： | 北京航空航天大学机械工程及自动化学院，北京,100191 |
| |
| 摘 要： | 提出一种基于Z-Stack的WSN(Wireless Sensor Network,无线传感器网络)节点中断程序设计方案.系统采用TOP-WSN物联网教学实验系统作为硬件平台,利用中断方式实现对于传感器节点数据的实时采集.数据信号由传感器本身发出,使得节点上的CC2430芯片产生外围中断,再由协议栈经过适当处理后发送到...
|
| 关 键 词： | Z-Stack 无线传感器网络 中断程序设计 |
WSN Node Interrupt Programming Design Based on Z-Stack |
| |
| Huang Zhen.WSN Node Interrupt Programming Design Based on Z-Stack[J].Microcontrollers & Embedded Systems,2011,11(7):79-81. |
| |
| Authors: | Huang Zhen |
| |
| Affiliation: | Huang Zhen(School of Mechanical Engineering and Automation,Beijing University of Aronautics and Astronautics,Beijing 100191,China) |
| |
| Abstract: | This paper proposes a design scheme of WSN node interrupt program based on Z-Stack.The system uses TOP-WSN Internet of things teaching system as the hardware platform,and achieves real-time data acquisition by use of the interrupt.Data signal is sent by the sensor itself.It makes CC2430 on the nodes generate the peripheral interrupt.After proper handling by the protocol stack,the interrupt is sent to the master gateway. |
| |
| Keywords: | Z-Stack wireless sensor network interrupt programming |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
