| 基于PMAC的三维激光加工自动编程系统的研究 |
| |
| 引用本文： | 苏敏,石世宏,胡进. 基于PMAC的三维激光加工自动编程系统的研究[J]. 激光与红外, 2006, 36(6): 433-435 |
| |
| 作者姓名： | 苏敏 石世宏 胡进 |
| |
| 作者单位： | 苏州大学机电工程学院,江苏,苏州,215021 |
| |
| 摘 要： | 针对三维激光加工的特点和具体要求，介绍了作者在开放式数控系统PMAC平台上，利用通用CAD／CAM软件Unigraphics（UG）的CAM模块，从CAD模型中提取5轴联动数控加工的刀轨数据，并经后置处理转化为激光三维加工的机床数据，然后在MATLAB中进行仿真，最后生成PMAC数控代码进行加工。开发出的-C维激光加工软件实用性强，可快速、高效地完成对三维复杂形状工件的激光加工。
|
| 关 键 词： | 激光三维加工 开放式数控系统 自动编程 |
| 文章编号： | 1001-5078（2006）06-0433-03 |
| 收稿时间： | 2005-11-30 |
| 修稿时间： | 2005-11-302005-12-23 |
Auto Programming System for 3D Laser Processing Based on PMAC |
| |
| SU Min,SHI Shi-hong,HU Jin. Auto Programming System for 3D Laser Processing Based on PMAC[J]. Laser & Infrared, 2006, 36(6): 433-435 |
| |
| Authors: | SU Min SHI Shi-hong HU Jin |
| |
| Affiliation: | College of Mechanical and Electronic Engineering of Soochow University, Suzhou 215021, China |
| |
| Abstract: | In this paper, the motion control of the laser head during laser processing is analyzed. Base on the platform of PMAC and with the help of CAM module of UG, position data and normal vector from CAD model are extracted, then the corresponding post processing of these data. The processing is simulated in MATLAB environment, finally PMAC NC code for processing are generated. The developed laser processing CAM system is practical with high speed and high efficiency for laser processing of complex 3 D parts. |
| |
| Keywords: | 3 D laser processing PMAC auto-programming |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
