首页 | 本学科首页   官方微博 | 高级检索  
     

低温热处理对Graphit-iC类石墨碳膜组织结构及耐磨性的影响
引用本文:李潇,施雯,苑俊峰,张健,陈智勇. 低温热处理对Graphit-iC类石墨碳膜组织结构及耐磨性的影响[J]. 上海金属, 2012, 34(4): 29-32
作者姓名:李潇  施雯  苑俊峰  张健  陈智勇
作者单位:上海大学材料科学与工程学院,上海,200072
摘    要:应用拉曼光谱(Raman)等测试方法分析了不同热处理温度对PVD技术制备的Graphit-iC类石墨碳膜涂层的组织结构、显微硬度、结合强度和磨损率的影响规律.结果表明:随温度升高,涂层发生sp3→sp2结构转变,相对强度比ID/IG增加,石墨化倾向增大;涂层磨损率在25~250℃温度区间内保持较低的水平,当温度继续上升后表面显微硬度及结合力降低,磨损率显著增大,耐磨性降低.

关 键 词:Graphit-iC类石墨碳膜  低温热处理  微观结构  耐磨性

EFFECT OF LOW TEMPERATURE HEAT TREATMENT ON STRUCTURE AND WEAR BEHAVIOR OF GRAPHIT-iC GRAPHITE-LIKE CARBON COATINGS
Li Xiao , Shi Wen , Yuan Junfeng , Zhang Jian , Chen Zhiyong. EFFECT OF LOW TEMPERATURE HEAT TREATMENT ON STRUCTURE AND WEAR BEHAVIOR OF GRAPHIT-iC GRAPHITE-LIKE CARBON COATINGS[J]. Shanghai Metals, 2012, 34(4): 29-32
Authors:Li Xiao    Shi Wen    Yuan Junfeng    Zhang Jian    Chen Zhiyong
Affiliation:Li Xiao Shi Wen Yuan Junfeng Zhang Jian Chen Zhiyong (School of Materials Science and Engineering,Shanghai University,Shanghai 200072,China)
Abstract:The effects of heat treatment temperature on microstructure,micro-hardness,wear and adhesion strength of Graphit-iC graphite-like carbon coatings prepared by PVD technique were analyzed by Raman spectroscopy and other test.The results indicated that as temperature increasing, sp3→sp2 phase transition was observed in the coatings and the intensity ratio I_D/I_G increased,and the tendency of graphitization was obvious.The wear rate maintained at low level between the temperature of 25~250℃,although the wear rates of the coatings increased obviously as the temperature increased,the micro-hardness and coating-substrate adhesion strength decreased.
Keywords:Graphit-iC Graphite-Like Carbon Coatings  Low Temperature Heat Treatment  Microstructure  Wear
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号