| 基于PLC控制的钻锪组合机床液压系统的改造 |
| |
| 引用本文： | 张强,杨建东.基于PLC控制的钻锪组合机床液压系统的改造[J].机械工程师,2012(10):46-47. |
| |
| 作者姓名： | 张强 杨建东 |
| |
| 作者单位： | 1. 长春理工大学机电工程学院,长春,130022
2. 吉林工商学院,长春,130062 |
| |
| 摘 要： | 分析了钻锪组合机床液压系统的工作原理和控制要求,确定了PLC的CPU型号,并给出相应的梯形图。
|
| 关 键 词： | PLC 液压系统 二次工进 |
Reconstruction of Drill-Counterbore Modular Machine Tool Hydraulic System Based on PLC |
| |
| ZHANG Qiang
,
YANG Jian-dong.Reconstruction of Drill-Counterbore Modular Machine Tool Hydraulic System Based on PLC[J].Mechanical Engineer,2012(10):46-47. |
| |
| Authors: | ZHANG Qiang YANG Jian-dong |
| |
| Affiliation: | 1.College of Mechanical and Electric Engineering, Changchun University of Science and Technology, Changchun 130022, China： 2.JiIin Business and Technology College, Changchun 130062, China) |
| |
| Abstract: | The working principle and control requirement of the hydraulic system in drill-counterbore modular machine tool are analyzed. The CPU model of PLC is determined. The relevant ladder diagram is given in this paper |
| |
| Keywords: | PLC hydraulic system secondary working feed |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
