| 求解面齿轮啮合轨迹的新方法 |
| |
| 引用本文： | 赵宁,曾晓春,郭辉,FANG Zong-de,方宗德.求解面齿轮啮合轨迹的新方法[J].计算机仿真,2009,26(1). |
| |
| 作者姓名： | 赵宁 曾晓春 郭辉 FANG Zong-de 方宗德 |
| |
| 作者单位： | 西北工业大学机电学院,陕西,西安,710072 |
| |
| 摘 要： | 根据面齿轮传动的点接触原理,提出一种求解面齿轮啮合轨迹的新方法,假设小齿轮、刀具、面齿轮三齿面同时啮合,通过求解小齿轮一刀具接触线和面齿轮一刀具接触线的交点,以确定它们在固定坐标系下的啮合线,从而反求面齿轮和小齿轮齿面上的啮合轨迹;通过MATLAB的数值计算功能,利用新方法求解了面齿轮传动的啮合轨迹,并与轮齿接触方法(TCA)求得的面齿轮啮合轨迹进行对比,发现结果一致,证明了方法的可行性;对安装误差下的面齿轮传动进行了分析,研究了不同安装误差对面齿轮啮合轨迹的影响.
|
| 关 键 词： | 面齿轮 啮合轨迹 轮齿接触分析 仿真 |
TCA of Face Gear Drive and A New Method for Solving Tooth Contact Path |
| |
| ZHAO Ning,ZENG Xiao-chun,GUO Hui,FANG Zong-de.TCA of Face Gear Drive and A New Method for Solving Tooth Contact Path[J].Computer Simulation,2009,26(1). |
| |
| Authors: | ZHAO Ning ZENG Xiao-chun GUO Hui FANG Zong-de |
| |
| Affiliation: | College of Mechatronics Engineering;Northwestern Polytechnical University;Xi'an Shanxi 710072;China |
| |
| Abstract: | The paper developed a new method to solve tooth contact path of face gear drive based on the point contact theory of face gear drive.Supposing the tooth faces of pinion,shaper and face-gear are simultaneously meshing,by solving the meshing equation of face gear-pinion and the meshing equation of pinion-shaper,the meshing line of face gear drive in local system was found,and translating the meshing line to the tooth face,the tooth contact path of face gear was got.Matlab program was used to calculate the too... |
| |
| Keywords: | Face-gear Tooth contact path Tooth contact analysis Simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
