| 大方坯连铸结晶器电磁搅拌的数值模拟 |
| |
| 引用本文： | 任兵芝,朱苗勇.大方坯连铸结晶器电磁搅拌的数值模拟[J].物理测试,2010,19(2). |
| |
| 作者姓名： | 任兵芝 朱苗勇 |
| |
| 作者单位： | 1. 中冶赛迪工程技术股份有限公司炼钢事业部，重庆 400013；2. 东北大学材料与冶金学院，辽宁 沈阳 110004 |
| |
| 摘 要： | 对大方坯连铸结晶器电磁搅拌过程的流场和温度场进行了数值模拟，并讨论了搅拌强度对流场和温度场的影响。结果表明：在结晶器电磁搅拌下，搅拌器区域的钢液变为水平旋转，使从水口向下吐出的钢水与向上回流的钢水流股相冲突，流股侵入深度变浅，从而使轴向温度迅速降低，径向温度升高，提高了热区位置，有利于传热；搅拌强度越大，钢水的二次流现象越明显，热区位置越高。
|
| 关 键 词： | 大方坯连铸 结晶器电磁搅拌 流场 温度场 数值模拟 |
D Numerical Simulation of Flow Field and Temperature Field in Bloom Continuous Casting Mold With Electromagnetic Stirring |
| |
| Affiliation: | 1. Department of Steelmaking, Cisdi Engineering Co., Ltd., Chongqing 400013, China; 2. School of Materials and Metallurgy, Northeastern University, Shenyang 110004,Liaoning, China |
| |
| Abstract: | The flow field and temperature field in bloom continuous casting mold with electromagnetic stirring were simulated by numerical method. The effect of the stirring intensity on flow and temperature fields was analyzed. The results show that the molten steel flows distributes circumferentially in the horizontal plane. and the molten steel flowing from submerged entry nozzle collides with the upward recirculation flow in the strand direction. With the decrease of immerged stream depth, the axial temperature decreases rapidly, and the radial temperature increases which will improve the heat transfer of molten steel in mold. The greater the stirring intensity, the more prominent the secondary flow phenomena is and the higher the position of hot area is. |
| |
| Keywords: | bloom continuous casting mold electromagnetic stirring flow field temperature field numerical simulation |
|
| 点击此处可从《物理测试》浏览原始摘要信息 |
