| 多次锻造的SiC颗粒增强耐热铝合金的研制与性能 |
| |
| 引用本文： | 李云平,李溪滨,刘如铁. 多次锻造的SiC颗粒增强耐热铝合金的研制与性能[J]. 粉末冶金技术, 2000, 18(4): 247-251 |
| |
| 作者姓名： | 李云平 李溪滨 刘如铁 |
| |
| 作者单位： | 中南工业大学粉冶所, 长沙 410083 |
| |
| 摘 要： | 研究了用粉末热锻工艺制备耐热铝基复合材料的过程以及SiC颗粒增强Al-Fe-V-Si耐热铝基复合材料的力学性能和室温、中温耐磨性。研究结果表明,SiC颗粒提高了复合材料强度和耐磨性,在250℃以下为轻微磨损,达到300℃时由于机制改变而发生严重磨损
|
| 关 键 词： | 耐热铝基复合材料 颗粒增强 磨损机制 粉末热锻 |
| 收稿时间： | 1999-12-08 |
| 修稿时间： | 1999-12-08 |
STUDY OF HIGH THERMAL STABILITY ALUMINIUM MATRIX COMPOSITE BY HOT FORGING |
| |
| Li Yunping,Li Xibin,Liu Rutie. STUDY OF HIGH THERMAL STABILITY ALUMINIUM MATRIX COMPOSITE BY HOT FORGING[J]. Powder Metallurgy Technology, 2000, 18(4): 247-251 |
| |
| Authors: | Li Yunping Li Xibin Liu Rutie |
| |
| Affiliation: | Central South University of Technology, Changsha 410083 |
| |
| Abstract: | The processing of powder hot forging to producing high thermal aluminium composite have been studied, as well as the strength and wear stability of SiC particlulate reinforced Al-Fe-V-Si heat resistant aluminium. It was found by the study that the sthength and wear stability of the composite were improved by SiC particulate. The composite was slightly tribodeformed below 250℃, but urgently tribodeformed on 300℃ as wear mechanism changed. |
| |
| Keywords: | High thermal stability aluminium matrix composite Particulate reinforced Wear mechanisim Hot forging |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《粉末冶金技术》浏览原始摘要信息 |
|
点击此处可从《粉末冶金技术》下载全文 |
