| 五轴联动加工中心主轴系统的结构优化 |
| |
| 引用本文： | 余洋,张建润,卢熹,孙庆鸿,彭文,姚树健.五轴联动加工中心主轴系统的结构优化[J].制造业自动化,2006,28(8):59-61,66. |
| |
| 作者姓名： | 余洋 张建润 卢熹 孙庆鸿 彭文 姚树健 |
| |
| 作者单位： | 1. 东南大学机械工程系,南京,210096
2. 江苏多棱数控机床股份有限公司,常州,213012 |
| |
| 基金项目： | 国家自然科学基金项目（50375026）;江苏省科技基础设施建设项目（BM200500） |
| |
| 摘 要： | 对五轴联动加工中心主轴系统进行动力学仿真分析,对原主轴系统的轴承支承系统和主轴结构进行了动态优化设计.针对主轴前端的单排轴承的不足,提出了双排轴承的设计方案.对于主轴结构,论文建立了以主轴前端动态变形最小为目标函数的优化模型,对主轴结构进行了优化设计,从而提高了主轴系统的静力学和动力学特性,满足了设计要求.
|
| 关 键 词： | 主轴系统 支承 轴承 优化设计 |
| 文章编号： | 1009-0134（2006）08-0059-04 |
| 收稿时间： | 2006-01-16 |
| 修稿时间： | 2006-01-16 |
Optimization design of the spindle system of 5-axis machining center |
| |
| YU Yang,ZHANG Jian-run,LU Xi,SUN Qing-hong,PENG Wen,YAO Shu-jian.Optimization design of the spindle system of 5-axis machining center[J].Manufacturing Automation,2006,28(8):59-61,66. |
| |
| Authors: | YU Yang ZHANG Jian-run LU Xi SUN Qing-hong PENG Wen YAO Shu-jian |
| |
| Affiliation: | 1. Southeast University, Nanjing 210096, China; 2. Jiangsu Duoling Nc Mechanical Tool Ltd Changzhou 213012, China |
| |
| Abstract: | Base on the dynamic simulation of the spindle system of 5-axis machining center, dynamic optimization design is done about the bearing support system and the structure of the spindle. To overcome the disadvantages of one-support bearing, two-support bearing is applied to the fore part of spindle. The minimum displacement of the spindle nose is used as objective function to design the structure of spindle. By these ways, the statics and dynamics characteristic of the spindle system are improved and satisfy the design demands. |
| |
| Keywords: | spindle system support bearing optimization design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
