| 换热管试压胎具的设计 |
| |
| 引用本文： | 李拥军.换热管试压胎具的设计[J].大氮肥,2000,23(2):82-83. |
| |
| 作者姓名： | 李拥军 |
| |
| 作者单位： | 宁夏化工厂!宁夏银川，750026 |
| |
| 摘 要： | 在换热设备制造过程中，一般要求对换热管进行逐根压力试验或抽验。本文讨论利用换热管端面进行密封的试压胎具的设计。
|
| 关 键 词： | 换热管 试压 胎具设计 化工设备 |
DESIGN OF PRESSURE TEST POSITIONER FOR HEAT EXCHANGING PIPES |
| |
| Li,Yongjun.DESIGN OF PRESSURE TEST POSITIONER FOR HEAT EXCHANGING PIPES[J].Large Scale Nitrogenous Fertilizer Industry,2000,23(2):82-83. |
| |
| Authors: | Li Yongjun |
| |
| Abstract: | In the process of manufacturing heat exchanging device,it is general practice to make pressure test to each or samples of heat exchanging pipes.This paper is a discussion of the design of the sealed pressure test positioner utilizing heat exchanging pipe ends. |
| |
| Keywords: | heat exchanging pipes pressure test positioner design |
| 本文献已被 CNKI 维普 等数据库收录！ |
