首页 | 本学科首页   官方微博 | 高级检索  
     

对甲苯磺酸铜催化合成丙酸乙酯
引用本文:邓斌,龙石红. 对甲苯磺酸铜催化合成丙酸乙酯[J]. 食品研究与开发, 2007, 28(4): 23-25
作者姓名:邓斌  龙石红
作者单位:1. 湘南学院化学与生命科学系,湖南,郴州,423000
2. 永州职业技术学院成教部,湖南,永州,425000
基金项目:湖南省高校青年骨干教师培养基金
摘    要:研究了对甲苯磺酸铜催化丙酸与乙醇的酯化反应,考察了醇酸摩尔比、催化剂用量、反应时间对酯化率的影响。实验结果表明,其较优条件为:丙酸0.1mol,醇酸摩尔比1.5:1,催化剂用量1.8mol%(基于丙酸的摩尔百分数),回流温度下反应2.0h,在此条件下酯化率可达93.6%。反应结束后对甲苯磺酸铜经过简单的相分离就可重复使用,无需再生,兼有均相和多相催化剂的优点。

关 键 词:对甲苯磺酸铜  丙酸乙酯  催化  酯化反应
修稿时间:2006-10-26

THE CATALYTIC SYNTHESIS OF ETHYL PROPIONATE BY COPPER P-TOLUENE SULFONATE
DENG Bin,LONG Shi-hong. THE CATALYTIC SYNTHESIS OF ETHYL PROPIONATE BY COPPER P-TOLUENE SULFONATE[J]. Food Research and Developent, 2007, 28(4): 23-25
Authors:DENG Bin  LONG Shi-hong
Affiliation:1.Department of Chemistry and Life Science, Xiangnan University, Chenzhou 423000, Hunan, China; 2.Adult Education Department,Yongzhou Vocational Technology Institute,Yongzhou 425000,Hunan, China
Abstract:Catalytic esterification reaction of propionic acid with ethyl alcohol by copper p-toluene sulfonate has been studied. The effects of the mole ratio of alcohol to acid,the amount of catalyst and reaction time in the reaction have been investigated. Results showed that the appropriate conditions were: molar ratio of ethyl alcohol to propionic acid was 1.5:1; 1.8 mol% Catalyst (molar percent of propionic acid) ; reaction time was 2.0 h at reflux temperature; the esterification yield reached to 93.6 %. Copper p-toluene sulfonate can be reused by simple phase-separation, no need of regeneration, it has merits of both homogeneous and heterogeneous catalyst.
Keywords:copper p-toluene sulfonate   ethyl propionate   catalysis   esterification
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号