| Abstract: | Perovskite La0.6Sr0.4Co0.8Fe0.2O3– (LSCF) powders have been successfully synthesized from oxide and carbonates based on the principle of gelcasting. Phase-forming temperature is very dependent on the ball-milling process during the suspension preparation. As the ball-milling time is increased, the temperature of phase formation decreases, therefore the perovskite powder obtained has a larger Brunaver–Emmett–Teller (BET) specific surface area. The grain sizes were around 1  m at 1000°C and 2 m at 1100°C from scanning electron microscopy (SEM) photographs. The perovskite powders have good sinterability: the sintering densities of ceramic bodies shaped with as-prepared powders were investigated. SEM photos show that sintered ceramics exhibit a well defined morphology in the packing and sintering of particles. The oxygen permeance of disc shaped samples, with a thickness ranging from 1.02 to 1.98 mm was 6.39 × 10–8–1.99 × 10–8 mol cm–2 s–1 at 900°C indicating that LSCF ceramics have high oxygen permeation. It can be concluded that gelcasting is a simple and effective method for preparing practical multicomponent perovskite powders. |
