| 注塑共混阻隔容器专用料及成型工艺的研究 |
| |
| 引用本文： | 丁永红,洪小秋.注塑共混阻隔容器专用料及成型工艺的研究[J].江苏石油化工学院学报,1999,11(3):5-8. |
| |
| 作者姓名： | 丁永红 洪小秋 |
| |
| 作者单位： | 江苏石油化工学院化学工程系!常州213016(丁永红，承民联，李萍)，扬子石油化工公司研究院!南京210048(洪小秋，邢文) |
| |
| 基金项目： | 中国石油化工集团公司资助 |
| |
| 摘 要： | 通过对共混注塑阻隔容器溶剂渗透率的测试， 研究了注塑成型加工工艺条件、相容剂、改性尼龙对容器阻隔性能的影响。
|
| 关 键 词： | 高密度聚乙烯 共混 注塑 阻隔容器 相容剂 |
The Study of HDPE/PA6 Injection-moulding Barrier Container |
| |
| Ding Yonghong,Cheng Minglian,Li Ping.The Study of HDPE/PA6 Injection-moulding Barrier Container[J].Journal of Jiangsu Institute of Petrochemical Technology,1999,11(3):5-8. |
| |
| Authors: | Ding Yonghong Cheng Minglian Li Ping |
| |
| Abstract: | In this paper,the HDPE/PA6 blend was prepared by HDPE,PA6 and MAH(PE-g-MA).The MAH was used as compatibilizing agent of HDPE/PA6.The HDPE/PA6 blend barrier containers was manufactured by injection-moulding process.The barrier properties of containers was related to the injection technique,the content of compatibilizing agent and PA6. |
| |
| Keywords: | HDPE/PA6 Blend Injection moulding Barrier container Compatibilizing agent |
| 本文献已被 CNKI 维普 等数据库收录！ |
