| 复合电镀法制备Ni-WC纳米涂层的组织与性能研究 |
| |
| 引用本文： | 李丽,王飚,张自华.复合电镀法制备Ni-WC纳米涂层的组织与性能研究[J].表面技术,2008,37(5):5-6,74. |
| |
| 作者姓名： | 李丽 王飚 张自华 |
| |
| 作者单位： | 昆明理工大学机电丁程学院,云南,昆明,650051;昆明理工大学机电丁程学院,云南,昆明,650051;昆明理工大学机电丁程学院,云南,昆明,650051 |
| |
| 摘 要： | 为了制得高硬度、高耐腐蚀的纳米复合涂层,采用复合电镀法在18-8不锈钢基体上制备了Ni-WC纳米镀层,并对镀层的表面形貌、显微硬度及耐蚀性进行了观察和检测.试验结果表明:复合镀层表面均匀,其显微硬度较不锈钢和纯镍镀层都有显著提高,耐蚀性约为不锈钢的4倍,却比纯镍镀层略低.
|
| 关 键 词： | Ni-WC纳米复合镀层 表面形貌 显微硬度 耐蚀性 |
| 收稿时间： | 2008/6/27 0:00:00 |
| 修稿时间： | 2008/10/10 0:00:00 |
Structure and Properties of Ni-WC Nano-composite Coating by Electroplating |
| |
| LI li,WANG Biao and ZHANG Zi-hua.Structure and Properties of Ni-WC Nano-composite Coating by Electroplating[J].Surface Technology,2008,37(5):5-6,74. |
| |
| Authors: | LI li WANG Biao and ZHANG Zi-hua |
| |
| Affiliation: | Department of Mechanical Engineering, Kunming University of Science and Technology, Kunming 650051, China,Department of Mechanical Engineering, Kunming University of Science and Technology, Kunming 650051, China and Department of Mechanical Engineering, Kunming University of Science and Technology, Kunming 650051, China |
| |
| Abstract: | In order to make the nano-composite coating with high micro-hardness and high corrosion resistance, Ni-based coating with nanometer WC particles was made on 18-8 stainless steel substrate. The surface morphology of the composite coating was observed, the micro-hardness and corrosion resistance of the composite coating were measured. The experiment results show that the composite coating has a smooth surface, and its micro-hardness is remarkably improved as compared with that of stainless steel or pure nickel coating, its corrosion resistance is about 4 times to that of stainless steel, but a little low than pure nickel coating. |
| |
| Keywords: | Ni-WC nano-composite plating Surface morphology Micro-hardness Corrosion resistance |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《表面技术》浏览原始摘要信息 |
|
点击此处可从《表面技术》下载全文 |
|
