基于Matlab/Simulink的内燃机凸轮挺柱磨损数值计算的仿真研究 |
| |
引用本文: | 左玉梅,王守尊.基于Matlab/Simulink的内燃机凸轮挺柱磨损数值计算的仿真研究[J].海军工程学院学报,2005,17(2):75-78. |
| |
作者姓名: | 左玉梅 王守尊 |
| |
作者单位: | 海军工程大学理学院,湖北武汉430033 |
| |
摘 要: | 建立了凸轮磨损计算的仿真模型,论证了模型的正确性以及利用Simulink进行凸轮机构的磨损数值计算仿真的有效性,并利用Matlab/Simulink对其进行仿真.仿真结果与实验结果较为吻合.
|
关 键 词: | 凸轮挺柱 Matlab/Simulink 建模 仿真 |
文章编号: | 1009-3486(2005)02-0075-04 |
收稿时间: | 2004-10-11 |
修稿时间: | 2004-11-20 |
On simulation of cam-follower wear model under circumstances of Matlab/Simulink |
| |
Authors: | ZUO Yu-mei WANG Shou-zun |
| |
Abstract: | A wear model of the cam-follower contract under the circumstances of Matlab/Simulink is built and simulated. The simulate results accord with the tested data, which proves the model is accurate. |
| |
Keywords: | cam-follower Matlab/Simulink modeling simulation |
本文献已被 维普 等数据库收录! |