| Abstract: | It has been shown that nano‐sized particles of secondary explosives are less sensitive to impact and can alter the energetic performance of a propellant or explosive. In this work the Rapid Expansion of a Supercritical Solution into an Aqueous Solution (RESS‐AS) process was used to produce nano‐sized RDX (cyclo‐1,3,5‐trimethylene‐2,4,6‐trinitramine) particles. When a saturated supercritical carbon dioxide/RDX solution was expanded into neat water, RDX particles produced from the RESS‐AS process agglomerated quickly and coarsened through Ostwald ripening. However, if the pH level of the suspension was changed to 7, particles were metastably dispersed with a diameter of 30 nm. When the supercritical solution was expanded into air under the same pre‐expansion conditions using the similar RESS process, RDX particles were agglomerated and had an average size of approximately 100 nm. Another advantage of using a liquid receiving solution is the possibility for coating energetic particles with a thin layer of polymer. Dispersed particles were formed by coating the RDX particles with the water soluble polymers polyvinylpyrrolidone (PVP) or polyethylenimine (PEI) in the RESS‐AS process. Both PVP and PEI were used because they have an affinity to the RDX surface. Small and well‐dispersed particles were created for both cases with both PVP and PEI‐coated RDX particles shown to be stable for a year afterward. Several benefits are expected from these small polymer coated RDX particles such as decreased sensitivity, controlled reactivity, and enhanced compatibility with other binders for fabrication of bulk‐sized propellants and/or explosives. |
