Investigations of deep resistivity structures at the Wairakei geothermal field

The Wairakei geothermal field was the proving ground for the use of electrical resistivity methods for geothermal exploration. At this site it was first demonstrated that a large contrast in resistivity existed between geothermal ground and the cold surroundings. Within the top 500 m of the geothermal field, low-resistivity (5–10 Ωm) reflects the effects of both the hot saline water in the pore spaces and the conductive rock-matrix. The first surveys at Wairakei used a Wenner array (a ∼550 m) to measure the resistivity values along tracks throughout the field; contour maps of the resistivities were used to estimate the lateral extent of the geothermal waters at a few hundred metres depth. In the late 1960s the Wenner array was superseded by the Schlumberger array (AB/2 = 500 m and 1000 m), which enabled deeper penetration and better definition of the extent of the geothermal waters. These early surveys showed that the bounds of the geothermal waters were often sharp, leading to the concept that a ‘resistivity boundary’ could be defined for New Zealand's liquid-dominated geothermal fields. As new methods of measuring electrical structure with greater precision became available, Wairakei was often chosen as the testing ground.