首页 | 本学科首页   官方微博 | 高级检索  
     


Ultra-Low-Powered Aqueous Shear Stress Sensors Based on Bulk EG-CNTs Integrated in Microfluidic Systems
Authors:Yanli Qu Chow   W.W.Y. Mengxing Ouyang Tung   S.C.H. Li   W.J. Xuliang Han
Affiliation:Centre for Micro & Nano Syst., Chinese Univ. of Hong Kong, Shenyang;
Abstract: Novel aqueous shear stress sensors based on bulk carbon nanotubes (CNTs) were developed by utilizing microelectricalmechanical system (MEMS) compatible fabrication technology. The sensors were fabricated on glass substrates by batch assembling electronics-grade CNTs (EG-CNTs) as sensing elements between microelectrode pairs using dielectrophoretic technique. Then, the CNT sensors were permanently integrated in glass–polydimethylsiloxane (PDMS) microfluidic channels by using standard glass–PDMS bonding process. Upon exposure to deionized (DI) water flow in the microchannel, the characteristics of the CNT sensors were investigated at room temperature under constant current (CC) mode. The specific electrical responses of the CNT sensors at different currents have been measured. It was found that the electrical resistance of the CNT sensors increased noticeably in response to the introduction of fluid shear stress when low activation current (≪1 mA) was used, and unexpectedly decreased when the current exceeded 5 mA. We have shown that the sensor could be activated using input currents as low as 100 $mu$A to measure the flow shear stress. The experimental results showed that the output resistance change could be plotted as a linear function of the shear stress to the one-third power. This result proved that the EG-CNT sensors can be operated as conventional thermal flow sensors but only require ultra-low activation power ($sim 1$ $mu$W), which is $sim 1000$ times lower than the conventional MEMS thermal flow sensors.
Keywords:
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号