首页 | 本学科首页   官方微博 | 高级检索  
     

合肥光源注入过程中束流负载效应和束流强度限制
引用本文:王琳,徐宏亮,冯光耀,李永军,李为民,刘祖平.合肥光源注入过程中束流负载效应和束流强度限制[J].原子能科学技术,2004,38(6):557-560.
作者姓名:王琳  徐宏亮  冯光耀  李永军  李为民  刘祖平
作者单位:中国科学技术大学,国家同步辐射实验室,安徽,合肥,230029
基金项目:国家重大科学工程合肥国家同步辐射实验室二期工程资助项目(P2A02) 国家自然科学基金资助项目(10205014)
摘    要:根据储存环高频系统束流负载理论,研究计算了合肥光源注入过程中高频系统的大失谐角工作模式和调谐工作模式。综合考虑两种模式利弊,给出了更为灵活的注入模式。对于合肥光源,只要新高频系统参数设置合理,束流可顺利注入积累到设计值300mA以上。

关 键 词:合肥光源  高频系统  储存环  束流强度  注入  调谐  负载效应  参数设置  工作模式  综合
文章编号:1000-6931(2004)06-0557-04

Beam Loading Effects and Intensity Limit in the Injection Process of Hefei Light Source
WANG Lin,XU Hong-liang,FENG Guang-yao,LI Yong-jun,LI Wei-min,LIU Zu-ping.Beam Loading Effects and Intensity Limit in the Injection Process of Hefei Light Source[J].Atomic Energy Science and Technology,2004,38(6):557-560.
Authors:WANG Lin  XU Hong-liang  FENG Guang-yao  LI Yong-jun  LI Wei-min  LIU Zu-ping
Abstract:Based on the beam loading theory in storage ring, traditional mode with large detuned angle and tuned mode of RF system in the injection process of Hefei light source (HLS) were calculated and disadvantages of these two modes were analyzed. Then a more flexible adjustment mode was put forward. In the injection process of HLS, beam would be injected and accumulated higher than design value 300 mA with appropriated parameters of new RF system.
Keywords:RF system  beam loading  Robinson instability  detuned angle  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号