实验室用连铸机系统的三维建模和运动仿真

目前,对于实验室用连铸机系统的研究还不多。采用SolidWorks软件及其应用插件COSMOSmotion分别对实验室用连铸机系统的结晶器、二冷区以及传动机构进行了三维建模和运动仿真,得到了结晶器和二冷区装配体的三维模型图及其爆炸图,以及齿轮传动机构装配体及其在运动时的力、角位移和力矩分别随时间的变化曲线,凸轮传动机构装配体及其在运动时的质心加速度、力及平动动量分别随时间的变化曲线,采用SolidWorks中的一个设计分析插件Simulation对滑轴零件进行了有限元分析,得到了滑轴零件的应力图和位移图。研究为实验室用连铸机系统的设计和使用提供了重要的参考依据。

Three-dimensional model of continuous caster and motion simulation for lab conticaster system

The research on lab continuous caster system is little currently. A three-dimensional model construc- tions and motion simulations are carried out for crystallizer, secondary cooling area and transimission mecha- nism of lab continuous caster system by SolidWorks software and its pluggable unit COSMOSmotion respec- tively. The model diagram, relevant blast diagram of crystallizer assembly and secondary cooling area assem- bly are obtained. The curves of force, angle displacement and moment changed with time during the motion simulation of gear transimission mechanism assembly, and the curves of barycenter acceleration, force and level move momentum changed with time during the motion simulation of cam transimission mechanism as- sembly are also obtained. The finite element analysis is carried out for slip shaft part by the simulation plugga- ble unit of SolidWorks software. The stress and displacement of slip shaft part are obtained. The research pro- vides important references for the design and use of lab continuous caster system.