| 中压加氢裂化加工大庆VGO的研究 |
| |
| 引用本文： | 胡志海,石玉林,熊震霖,刘学芬.中压加氢裂化加工大庆VGO的研究[J].石油炼制与化工,2001,32(4):1-4. |
| |
| 作者姓名： | 胡志海 石玉林 熊震霖 刘学芬 |
| |
| 作者单位： | 石油化工科学研究院, |
| |
| 摘 要： | 介绍了中压加氢裂化（RMC）工艺在3L中型试验装置上加工大庆VGO及其合油的研究结果，结果表明，利用中压加氢裂化工艺加工大庆VGO或其混合油可以获得高芳烃潜含量的重整原料，合格的3号喷气燃料，低硫和低凝柴油以及BMCI低的尾油，蒸汽裂解试验显示尾油馏分是很发的蒸汽裂争制乙烯的料，其乙烯书率较大庆AGO高2－3个百分点，该工艺还可灵活地加工VGO／催化裂化柴油或VGO／焦化蜡油的混合油。
|
| 关 键 词： | 中压加氢裂化 大庆原油 减压粗柴油 转化率 RMC VGO |
| 修稿时间： | 2000年7月21日 |
RESEARCH ON MID-PRESSURE
HYDROCRACKING OF DAQING VGO |
| |
| Hu Zhihai,Shi Yulin,Xiong Zhenlin,Liu Xuefen.RESEARCH ON MID-PRESSURE
HYDROCRACKING OF DAQING VGO[J].Petroleum Processing and Petrochemicals,2001,32(4):1-4. |
| |
| Authors: | Hu Zhihai Shi Yulin Xiong Zhenlin Liu Xuefen |
| |
| Abstract: | Mid pressure hydrocracking technology RMC was conducted on a 3L pilot plant processing Daqing VGO and its mixtures. The test result showed that reformer feedstock with high potential aromatics, 3 # jet fuel, low sulfur and low solidifying point diesel and unconverted oil with low BMCI value were obtained. The unconverted oil was a good feedstock for steam cracking and its ethylene yield was 2%-3% higher than that of Daqing AGO feedstock. RMC technology also showed the flexibility for processing the mixtures of LCO/VGO and LCO/CGO/VGO. |
| |
| Keywords: | mid pressure hydrocracking Daqing crude oil Vacuum gas oil conversion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
