| 放置过滤器浇注系统的设计 |
| |
| 引用本文： | 牛广源,贾天敏.放置过滤器浇注系统的设计[J].铸造技术,1996(6):28-30. |
| |
| 作者姓名： | 牛广源 贾天敏 |
| |
| 作者单位： | 辽宁工学院 |
| |
| 摘 要： | 综述了常用的网型、芯型、泡沫陶瓷过滤器的研究和应用情况。指出应根据过滤器类型，确定其在浇注系统中的安放位置并相应改变该处的结构和截面积，以便在使用过滤器净化金属的同时，保证充型速度不变。
|
| 关 键 词： | 过滤器 浇注系统设计 |
Molding Process of Core Enclosure Casting |
| |
| Tang Yuhua.Molding Process of Core Enclosure Casting[J].Foundry Technology,1996(6):28-30. |
| |
| Authors: | Tang Yuhua |
| |
| Affiliation: | Tang Yuhua (Heilongjiang Chemical School) Zhang Fengjun Wang jingqi (Qiqihar No 1 Machine Tool Works) |
| |
| Abstract: | In this paper the special molding process of core enclosure casting and its procedure and introduced The approaehes to solve the problem of core ventilating and removal of casting stress are offered And the notice of casting defects are given too |
| |
| Keywords: | Molding Core enclosure casting Ventilating chapelet |
| 本文献已被 CNKI 维普 等数据库收录！ |
