首页 | 本学科首页   官方微博 | 高级检索  
     

ICP-AES 法测定硼铸铁中的硼
引用本文:张光海,周西林.ICP-AES 法测定硼铸铁中的硼[J].广州化工,2014(23):153-154,180.
作者姓名:张光海  周西林
作者单位:1. 首钢集团贵阳特殊钢有限责任公司技术中心钢研所,贵州 贵阳,550005
2. 重庆市计量质量检测研究院铝镁中心,重庆,401121
摘    要:采用电感耦合等离子体原子发射光谱法( ICP-AES )探讨硼铸铁中硼的测定。以盐硝混酸(3+1+6)和硫酸溶液(1+3)在低温下溶解样品,溶解完毕后定容,在设定的仪器工作条件下测定。硼检出限为0.027 mg/L。用该方法可测定硼铸铁中0.0034%~0.38%硼含量,连续测定6个平行样测定结果的相对标准偏差均小于4.52%,其回收率在93%~108%、相对误差在3.03%以内。

关 键 词:硼铸铁  

Determination of Boron in Boron Cast Iron by ICP-AES
ZHANG Guang-hai,ZHOU Xi-lin.Determination of Boron in Boron Cast Iron by ICP-AES[J].GuangZhou Chemical Industry and Technology,2014(23):153-154,180.
Authors:ZHANG Guang-hai  ZHOU Xi-lin
Affiliation:ZHANG Guang-hai;ZHOU Xi-lin;Shougang Group of Guiyang Special Steel Co.,Ltd.,Technology Center of Iron and Steel Institute;Aluminum and Magnesium Center of Chongqing Academy of Metrology and Quality Inspection;
Abstract:Using inductively coupled plasma atomic emission spectrometry ( ICP-AES ) , the determination of the boron cast iron boron was discussed.With salt nitrate mixed acid ( 3+1+6 ) and sulfuric acid solution ( 1+3 ) sample dissolved in low temperature, the boron was measured after the completion of the constant volume dissolved, under the working conditions of settinginstrument.Boron detection limit was 0.027 mg/L.Using this method can determine the boron cast iron by 0.0034%~0.38% boron content, continuous determination of six parallel sample the determination results of relative standard deviation was less than 4.52%, the recovery was 93%~108%, and relative error was within 3.03%.
Keywords:ICP-AES  boron cast iron  boron
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号