| 平面行切加工中的刀轨优化问题 |
| |
| 引用本文： | 毛志江,彭建飞.平面行切加工中的刀轨优化问题[J].煤矿机械,2004(3):81-83. |
| |
| 作者姓名： | 毛志江 彭建飞 |
| |
| 作者单位： | 江苏省常熟广播电视大学,江苏,常熟,215500 |
| |
| 摘 要： | 为提高加工效率和精度 ,基于ACIS几何平台 ,针对平面型腔加工行切法的特点 ,分析影响加工效率的重要因素 ,提出利用“端点同环最短距离优化原则” ,对刀具轨迹进行优化。
|
| 关 键 词： | 平面型腔 行切加工 刀轨优化 加工效率 |
| 文章编号： | 1003-0794(2004)03-0081-03 |
| 修稿时间： | 2003年12月14 |
The problem on the majorization of the knife track in the flat surface lieu cutting |
| |
| MAO Zhi-jiang,PENG Jian-fei.The problem on the majorization of the knife track in the flat surface lieu cutting[J].Coal Mine Machinery,2004(3):81-83. |
| |
| Authors: | MAO Zhi-jiang PENG Jian-fei |
| |
| Abstract: | In order to improve the efficiency and the accuracy,according to the ACIS geometry platform, aim at the distinctive features in flat surface impression processing,analyze the important factors affecting procossing accuracy,put forward that optimize the knife track by using the principle on the shortrang from the extreme point to the toroid. |
| |
| Keywords: | flat surface impression lieu cutting processing knife track majorization processing efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
