微表处湿轮磨耗值影响因素的探究 |
| |
引用本文: | 张星宇.微表处湿轮磨耗值影响因素的探究[J].中国建材科技,2014,23(4):65-67. |
| |
作者姓名: | 张星宇 |
| |
作者单位: | 甘肃路桥养护科技有限责任公司,甘肃兰州,730070 |
| |
摘 要: | 本文通过湿轮磨耗实验,研究了微表处混合料在水浸泡条件下的抗磨耗性能,总结出沥青酸值和粉料掺加量两个显著的影响因素。简而言之,在低于某酸值条件下,即使增大沥青混合料的油石比,微表处混合料的耐磨耗性能仍然不能满足规范要求。此外,0.075mm粒径以下的矿粉掺量,也是微表混合料抗磨耗能力的另一重要影响因素。
|
关 键 词: | 乳化沥青 微表处 级配 湿轮磨耗 |
Factors influencing wear resistance of micro-surfacing mixture |
| |
Abstract: | By means of WTAT tests, our investigation shows that acid value of bitumen and powder content in aggregates play important role in micro-surfacing' s anti-abrasion performance. Generally, in terms of bitumen with low acid value, wear resistance of mixture tends to be out of spec, even though oil/aggregate ratio is higher than normal. Additionally, powder content in gradation makes big influence on anti-abrasion as well. |
| |
Keywords: | bitumen emulsion micro suface gradation wear performance |
本文献已被 CNKI 维普 万方数据 等数据库收录! |
|