| 用改性纳米SiC粉体强化灰铸铁的性能 |
| |
| 引用本文： | 李建卫,陈美玲,高宏,赵颖华. 用改性纳米SiC粉体强化灰铸铁的性能[J]. 机械工程材料, 2006, 30(12): 56-59 |
| |
| 作者姓名： | 李建卫 陈美玲 高宏 赵颖华 |
| |
| 作者单位： | 华东理工大学机械与动力工程学院,上海,200237;大连交通大学材料科学与工程学院,辽宁,大连,116028;大连海事大学道路与桥梁工程研究所,辽宁,大连,116026 |
| |
| 摘 要： | 研究了不同含量的改性纳米SiC粉体对灰铸铁显微组织、力学性能及耐磨性能的影响。结果表明：与原灰铸铁材料相比，经改性纳米SiC粉体强化处理后的灰铸铁组织明显细化，珠光体含量增加，力学性能、耐磨性能明显提高，当纳米SiC粉体含量为0．1％时，强化材料的性能提高最大，其抗拉强度提高了22．7％，硬度增加了9．3％。
|
| 关 键 词： | 改性纳米SiC粉体 灰铸铁 力学性能 耐磨性能 |
| 文章编号： | 1000-3738（2006）12-0056-04 |
| 收稿时间： | 2005-12-15 |
| 修稿时间： | 2005-12-152006-03-12 |
Properties of Gray Cast Iron Strengthened by Surface Modified SiC Nano-powders |
| |
| LI Jian-wei,CHEN Mei-ling,GAO Hong,ZHAO Ying-hua. Properties of Gray Cast Iron Strengthened by Surface Modified SiC Nano-powders[J]. Materials For Mechanical Engineering, 2006, 30(12): 56-59 |
| |
| Authors: | LI Jian-wei CHEN Mei-ling GAO Hong ZHAO Ying-hua |
| |
| Affiliation: | 1. East China University of Science and Technology, Shanghai 200237, China; 2. Dalian Jiaotong University, Dalian 116028, China; 3. Dalian Maritime University, Dalian 116026, China |
| |
| Abstract: | The effects of different contents of surface modified SiC nano-powders on the microstructure, mechanical properties and wear resistance of gray cast iron were studied. Compared with original gray cast iron, the reinforced materials are characterized with finer microstructure, increased content of pearlite, improved mechanical properties and greatly improved wear resistance. With the content of 0. 1% of SiC nano-powders, the tensile strength of the reinforced material is improved by 22. 7%, the hardness is increased by 9. 3%, and the wear resistance is much better than that of the original material. |
| |
| Keywords: | surface modified SiC nano-powder gray cast iron mechanical property wear resistance |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
